To get the latest news about Performance Liquidations sales and new products, please enter your email address below.






You are here: Home > Water Pumps

Vigilante High-Performance Aluminum Water Pumps are engineered to deliver an increased water flow, block pressure, and balanced delivery. These super velocity pumps significantly improve cooling for all street, high performance and racing applications. Equalized water flow distribution and pressure balanced water passages minimize internal engine hot-spots. Each pump features low pressure-injected, aluminum alloy pump bodies that are complemented by a cold-rolled carbon steel impeller of a closed-captured multi-van axial design with double-welded front and rear faceplates.

Vigilante Water Pumps Feature:
  • Bearing steel alloy .750 diameter shafts (in most applications)
  • Road Race endorsed for engine speeds above 7,000 RPM
  • Low pressure-injected aluminum alloy housing
  • Front and rear roller/ball bearings to minimize harmonics
  • Cold-rolled carbon steel impeller of a closed-captured multi-van axial design
  • Double-welded front and rear impeller faceplates to minimize cavitation and maximize flow
High Performance Water Pumps
Vigilante High-Performance Aluminum Water Pumps are engineered to deliver an  increased water flow, block pressure, and balanced delivery. These super velocity pumps significantly improve cooling for all street, high  performance and racing applications. Equalized water flow distribution  and pressure balanced water passages minimize internal engine hot-spots. Each pump features low pressure-injected, aluminum alloy pump bodies  that are complemented by a cold-rolled carbon steel impeller of a  closed-captured multi-van axial design with double-welded front and rear faceplates.
Competition Series Water Pumps
Vigilante Competition Series Aluminum Racing Water Pumps are engineered to deliver a volumetrically increased water flow that significantly improves cooling system demands of circle track and endurance racing. All aluminum alloy pumps feature a precision cast-iron impeller design with a revised entry, 3/4 impeller and pilot shaft, and pressure-balanced water passages to equalize flow and minimize engine hot spots at any speed.
Electric Water Pumps
The electric water pump was designed to alleviate the power drag produced by conventional pulley drive units. A heavy duty electric motor, turning at approximately 1,500 rpm, is more than adequate to fulfill cooling needs without draining horsepower from the engine. The unit can be wired to operate manually, even with the engine off. The motor life is rated at 2,750 hours of continuous operation at 176 F. Kit is complete with gaskets, billet aluminum inlet fitting, mounting hardware, pigtail connector, and timing cover block-off plate (Ford Applications).
Accessories and Replacement Parts
Fittings, Replacement pumps, thermostats and housings, as well as Electric Water Pump Fittings for all engines.