To get the latest news about Vigilante Performance's sales and new products, please enter your email address below.





  Home > Intake Manifolds > Edelbrock > Chevrolet > Chevrolet_Big Block >

Edelbrock Intake Manifold_Big Victor 2_Rectangular Port_Chevrolet 454_9.800 Block_4500 Carb Flange
Edelbrock Intake Manifolds

Photo may not be actual product



 
Price $820.00


Product Code: EDE-28001

Description
 


Edelbrock Big Victor 2 Spread Port intake manifold is designed for large cubic inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big Chief or Brodix Big Duke cylinder heads, this manifold has an average runner area of approximately 4.750 sq in. The port exits have been reduced to accommodate the wide variety of intake port sizes and require port matching. The runners have a minimum corner radius of .500 from the plenum to the exit allowing the popular oval port shape to be used. The outside runners are shorter and straighter than other manifolds and the plenum is longer front to back. These features, combined with approximately 5% taper in runner cross sectional area, give better top end horsepower while maintaining consistency and throttle response off the stop. All applications are equipped with a 4500 Series flange and will accept 2.250 throttle body butterflies without a spacer or modification.

  • Fits 9.800 Blocks
  • Rectangular Port Heads
  • 3,500 to 8,500 RPM Range
  • 9.210 Overall Height
  • 4.500 Carb Flange
  • Cast and machined in the USA



In need of more air to meet your power goals? VPE offers complete porting services for intake manifolds and cylinder heads.

https://www.p65warnings.ca.gov/


Browse for more products in the same category as this item:

Intake Manifolds > Edelbrock > Chevrolet > Chevrolet_Big Block
Intake Manifolds > Edelbrock > Chevrolet > Chevrolet_Big Block > 9.800 Block Height