To get the latest news about Vigilante Performance's sales and new products, please enter your email address below.





  Home > Stroker Kits by VPE > Ford - 351 Windsor > 351 Cubic Inches - 3.500 Stroke > Dish Top >

A_Villain Engine Kit_Ford 351W_5.955 Rod_Dish_-14.5cc_External_STD Wedge
VPE Villain Stroker Kit

Photo may not be actual product



 


Available Part Numbers/Oversize


9001-12001-000 - 4.000
9001-12001-030 - 4.030
9001-12001-040 - 4.040
9001-12001-060 - 4.060


Stroker Kits - Done Right

VPE Villain Engine Kits are available in various displacements and are based on a factory block, 4340 forged steel rods, and a cast steel crankshaft with Probe SRS Series forged pistons. Most feature Nitride Steel Top/Napier Second Ring Sets and are perfectly suited as stock replacement, or they can be set up for high performance street or street and strip combinations. Boost is not recommended with cast steel crankshafts.

The longest rod feasible is utilized in each instance, which gains the maximum piston to counterweight and rod bolt to camshaft clearance possible, as well as decreased piston weight.

Altered stroke and/or compression ratios are not legal for use in emissions controlled vehicles.

VPE - Villain Engine Kit

  • Cast Steel Crankshaft
  • 4340 Forged Steel I-Beam Rods
  • Probe SRS Series Forged Pistons
  • Reduced Tension High-Performance Ring Sets
  • ARP 8740 Cap Screws
  • Balancing is available upon request
  • Components rated at 550+ Horsepower


If you can't find the kit you're looking for please contact us at [email protected] and we'll be happy to assist you in designing a kit that exactly suits your preferences.

Please allow 4 to 6 weeks for piston manufacture

www.P65Warnings.ca.gov


Item# Item Name Price Qty Add
9001-12001-000 351W Villain Engine Kit_4.000 (000)
$1,900.00
9001-12001-030 357W Villain Engine Kit_4.030 (030)
$1,900.00
9001-12001-040 359W Villain Engine Kit_4.040 (040)
$1,900.00
9001-12001-060 362W Villain Engine Kit_4.060 (060)
$1,900.00
Check the items you wish to purchase, then click


Technical Specs:
Item Code 9001-12001
Vendor NameVPE
Product TypeEngine Kit
Product SeriesVillain
Engine Displacement351
Engine FamilyFord - 351 Windsor Based V8
BlockFactory or Aftermarket
Block Height9.500
Base Bore4.000
Piston ManufacturerProbe Industries
Valve ReliefsAll 20d Heads
Piston Material2816-t61
Piston StyleDish
Piston Net Volume-14.5
Compression Height1.772
Pin Diameter.912
Pin Type.150 Wall x 2.500 Long
Pin Material5115 Steel
Ring TypeNitride Steel Top _ Napier Second
Ring Width1.5 - 1.5 - 3.0
Gas PortsNo
Gas Port TypeN/A
Crankshaft VendorScat Enterprises
Crankshaft MaterialCast Steel
Crankshaft Stroke3.500
Center CounterweightNo
Reluctor WheelNo
Main Journal3.000
Rod Journal2.311
Rear Main Seal1 or 2 Piece
Engine BearingsKing SI Series
BalanceExternal (28 oz)
Rough Bob WeightN/A
BalancedNo
Rod VendorScat Enterprises
Rod TypePro Series I-Beam
Rod Length5.956
Pin EndFloating
Rod Material4340 Forged Steel
Rod BoltARP 8740 Cap Screw
Notes:




Compression Ratio:

Cylinder Head Volume
Part Number Net cc 58cc 61cc 64cc 72cc
9001-12001-000 -14.5 9.68 9.38 9.09 8.43
9001-12001-030 -14.5 9.81 9.50 9.21 8.54
9001-12001-040 -14.5 9.85 9.54 9.25 8.57
9001-12001-040 -14.5 9.93 9.62 9.33 8.65
Computed with .010 deck and .040 x 4.060 gasket



Browse for more products in the same category as this item:

Stroker Kits by VPE > Ford - 351 Windsor > 351 Cubic Inches - 3.500 Stroke > Dish Top