To get the latest news about Vigilante Performance's sales and new products, please enter your email address below.





  Home > Balancers > Romac > Steel Inner/Aluminum Outer (Gold Series) >

Romac Damper_SFI_Steel Inner/Aluminum Outer_GM LS1/LS2 F_Body_25% Underdrive_Black_Internal
Romac Balancer

Photo may not be actual product



 
Alternative Views:


Price $370.00


Product Code: ROM-A0353SA

Description
 


The Romac Gold Series Balancers are constructed with a Steel Inner Hub/Aluminum Outer Ring, for very high performance Street, Marine or Race engines requiring the added insurance of a Steel Inner Hub for strength where dry sump pumps, etc, may be installed.

We recommend this style of balancer over all other balancers produced due to its flexibility and endurance characteristics. Weight savings of approximately 33% can be achieved with this style of balancer over the Red Series or factory units. They are available in External or Neutral balance with weights ranging from 4 to 7.75 lbs. Romac Gold Series Balancers are effective to 10,000 RPM.

Balancers can be ordered with undersized bores to suit undersized crankshafts. Please call for assistance with these applications. To be sure of the bore size you need you should measure the crankshaft snout prior to purchase. Additional charges will apply.

Part ROM-A0353SA
Application Chevrolet 1990-2002 F Body
Use All
Balance Internal
SFI Approved Yes (18.1 Specification)
Overall Diameter 5.750
Overall Length 3.795
Nose ID 1.4820 - 1.4825
Seal Diameter 2.130
Pulley Grooves 0
Serpentine Grooves 4 & 6
Bolt Holes 3
Pulley Pattern N/A
Material Steel Inner/Aluminum Outer
Type Elastomer
Finish Black
Timing Marks Yes
Degree Range 360
Weight 5lb 4oz
Vendor Romac
Notes: 25% Underdriven


www.P65Warnings.ca.gov


Browse for more products in the same category as this item:

Balancers > Romac > Steel Inner/Aluminum Outer (Gold Series)
Balancers > Romac > Steel Inner/Aluminum Outer (Gold Series) > GM - LS Series