To get the latest news about Vigilante Performance's sales and new products, please enter your email address below.

  Home > Pistons > Probe Forged Pistons > SRS - Sportsman Race Series > Chrysler > Chrysler - Late Model Hemi >

Probe Forged Pistons_SRS Series_Chrysler Gen III Hemi _Dish_1.220 C/H_4.060 Base Bore_-17.7cc_.927 Pin
Probe Forged Pistons

Photo may not be actual product
 


Available Part Numbers/Oversize

8140-1-15295-000 - 4.040
8140-1-15295-030 - 4.060
8140-1-15295-040 - 4.070
8140-1-15295-060 - 4.080


Probe Industries Sportsman Race Series (SRS) Forged Pistons are designed for high performance street and all racing applications. They are available in a wide variety of designs, tuned to achieve the highest performance possible. Any combination from high performance street to mild nitrous or boost to race only cars will find Probe SRS Series Forged Pistons to be the perfect piston for virtually any application.
  • 2618-t6 Forged Aluminum
  • Lightweight wrist pins
  • Lightweight piston designs
  • Full floating wrist pins
  • Tight running clearances
  • Low Friction Narrow piston rings
  • Broached Pin Oilers
  • Low drag skirt design
  • Large variety of compression ratios
  • Design specific valve reliefs
  • Nitrous - to 250 H/P
  • Forced Induction - 12 lbs
  • Four (each) minimum order quantity
Custom sizes and applications are also available. Additional cost and manufacture times may apply.
Allow approximately 6 weeks for manufacture. Delivery times may vary seasonally.


Add a Total Seal Performance Ring Set......click here

www.P65Warnings.ca.gov





Technical Specs:
Item Code8145-2-14872
VendorProbe Industries
Product TypePistons
Product ModelSportsman Race Series - SRS
Nitrous250 H/P
Forced Induction12 lbs
Engine Displacement6.1L
Engine FamilyChrysler Late Model Hemi
Material2618-t61
Base Bore4.060
Stroke3.795
Rod Length6.125
Compression Height1.220
Top TypeDish
Net Piston Volume-17.7
Minimum Deck Thickness.200
Valve Pocket LocationGen II Hemi
Valve Pocket Cutters2.250 Intake - 0.000 Exhaust
Valve Pocket Depth.125 Intake - .000 Exhaust
WeightTBA
Wrist Pin Type5115 Carbon Steel
Wrist Pin Diameter.927
Wrist Pin Length2.500
Wall Thickness.150
Wrist Pin Weight122
Pin OilersForced
Pin Lock TypeDouble Spiral
Oil Support RailYes
Rings IncludedNo
Ring Grooves1.5 - 1.5 - 3.0
Gas PortsNo
Gas Port SizeN/A
Ring Lands.250 - .170 - .080
QuantitySold in sets of 8
Minimum Order Quantity4 (each)
Notes




Compression Ratio:
Cylinder Head Volume
Part Number Net cc 69cc 72cc 75cc 85cc
8145-2-14872-000 -17.7 12.24 11.81 11.54 10.91
8145-2-14872-020 -17.7 12.35 11.91 11.64 11.01
Computed with .010 deck and .040 x 4.100 gasket

Browse for more products in the same category as this item:

Pistons > Probe Forged Pistons > SRS - Sportsman Race Series > Chrysler > Chrysler - Late Model Hemi