To get the latest news about Vigilante Performance's sales and new products, please enter your email address below.

  Home > Stroker Kits by VPE > Ford - 302 Windsor > 347 Cubic Inches - 3.400 Stroke > Dish Top >

B_Vigilante Engine Kit_Ford 347_5.400 Rod_Dish_-20.0cc_Internal_STD Wedge
VPE Vigilante Engine Kit

Photo may not be actual product


Available Part Numbers/Oversize

9100-12012-000 - 4.000
9100-12012-030 - 4.030
9100-12012-040 - 4.040

Stroker Kits - Done Right

VPE Vigilante Engine Kits are available in various displacements and are suitable for stock or aftermarket blocks, consisting of 4340 Steel H-Beam Connecting Rods, a 4340 Forged Steel Crankshaft and Probe SRS Series 2618-t6 Forged Pistons. Most feature Nitride Steel Top/Napier Second Ring Sets. They are perfectly suited for stock replacement applications, or they can be set up with boost or increased compression for high performance street or street and strip combinations.

The longest rod feasible is utilized in each instance, which gains the maximum piston to counterweight and rod bolt to camshaft clearance possible, as well as decreased piston weight.

Altered stroke and/or compression ratios are not legal for use in emissions controlled vehicles.

Vigilante Engine Kit

  • 4340 Forged Steel Crankshaft
  • 4340 Forged Steel H-Beam Rods
  • Probe SRS Series 2618-t61 Forged Pistons
  • Reduced Tension High-Performance Ring Sets
  • ARP 8740 Cap Screws
  • Balancing is available upon request
  • Components rated at 700+ Horsepower

If you can't find the kit you're looking for please contact us at [email protected] and we'll be happy to assist you in designing a kit that exactly suits your preferences.

Please allow 4 to 6 weeks for piston manufacture

Item# Item Name Price Qty Add
9100-12012-000 342 Vigilante Engine Kit_4.000 (000)
9100-12012-030 347 Vigilante Engine Kit_4.030 (030)
9100-12012-040 349 Vigilante Engine Kit_4.040 (040)
Check the items you wish to purchase, then click

Technical Specs:
Item Code 9100-12012
Vendor NameVPE
Product TypeEngine Kit
Product SeriesVigilante
Engine Displacement347
Engine FamilyFord - 302 Based V8
BlockFactory or Aftermarket
Block Height8.200
Base Bore4.000
Piston ManufacturerProbe Industries
Valve ReliefsAll 20d Heads
Piston Material2618-t61
Piston StyleDish
Piston Net Volume-17.0
Compression Height1.090
Pin Diameter.927
Pin Type.150 Wall x 2.500 Long
Pin Material5115 Steel
Ring TypeNitride Steel Top _ Napier Second
Ring Width1.5 - 1.5 - 3.0
Gas PortsNo
Gas Port TypeN/A
Crankshaft VendorScat Enterprises
Crankshaft Material4340 Forged Steel
Crankshaft Stroke3.400
Center CounterweightNo
Reluctor WheelNo
Main Journal2.248
Rod Journal2.123
Rear Main Seal1 or 2 Piece
Engine BearingsKing XP Series
Rough Bob Weight1,720
Rod VendorScat Enterprises
Rod TypeH-Beam
Rod Length5.400
Pin EndFloating
Rod Material4340 Forged Steel
Rod BoltARP 8740 Cap Screw

Compression Ratio:

Cylinder Head Volume
Part Number Net cc 58.0 61cc 64cc 72cc
9100-12012-000 -20.0 8.85 8.60 8.36 7.79
9100-12012-030 -20.0 8.91 8.65 8.41 7.83
9100-12012-040 -20.0 9.06 8.80 8.55 7.96
Computed with .010 deck and .040 x 4.060 gasket

Browse for more products in the same category as this item:

Stroker Kits by VPE > Ford - 302 Windsor > 347 Cubic Inches - 3.400 Stroke > Dish Top
Stroker Kits by VPE > Ford - 302 Windsor > 347 Cubic Inches - 3.400 Stroke > Dish Top > 20 Standard Wedge