To get the latest news about Vigilante Performance's sales and new products, please enter your email address below.

  Home > Stroker Kits by VPE > Ford - 302 Windsor > 347 Cubic Inches - 3.400 Stroke > Dish Top >

A_Villain Engine Kit_Ford 347_5.400 Rod_Dish_-11.2cc_External_STD Wedge
VPE Villain Stroker Kit

Photo may not be actual product


Available Part Numbers/Oversize

9000-12003-000 - 4.000
9000-12003-030 - 4.030
9000-12003-040 - 4.040

Stroker Kits - Done Right

VPE Villain Engine Kits are available in various displacements and are based on a factory block, 4340 forged steel rods, and a cast steel crankshaft with Probe SRS Series forged pistons. Most feature Nitride Steel Top/Napier Second Ring Sets and are perfectly suited as stock replacement, or they can be set up for high performance street or street and strip combinations. Boost is not recommended with cast steel crankshafts.

The longest rod feasible is utilized in each instance, which gains the maximum piston to counterweight and rod bolt to camshaft clearance possible, as well as decreased piston weight.

Altered stroke and/or compression ratios are not legal for use in emissions controlled vehicles.

VPE - Villain Engine Kit

  • Cast Steel Crankshaft
  • 4340 Forged Steel I-Beam Rods
  • Probe SRS Series Forged Pistons
  • Reduced Tension High-Performance Ring Sets
  • ARP 8740 Cap Screws
  • Balancing is available upon request
  • Components rated at 550+ Horsepower

If you can't find the kit you're looking for please contact us at [email protected] and we'll be happy to assist you in designing a kit that exactly suits your preferences.

Please allow 4 to 6 weeks for piston manufacture

Item# Item Name Price Qty Add
9000-12003-000 342 Villain Engine Kit_4.000 (000)
9000-12003-030 347 Villain Engine Kit_4.030 (030)
9000-12003-040 349 Villain Engine Kit_4.040 (040)
Check the items you wish to purchase, then click

Technical Specs:
Item Code 9000-12003
Vendor NameVPE
Product TypeEngine Kit
Product SeriesVillain
Engine Displacement347
Engine FamilyFord - 302 Based V8
BlockFactory or Aftermarket
Block Height8.200
Base Bore4.000
Piston ManufacturerProbe Industries
Valve ReliefsAll 20d Heads
Piston Material2816-t61
Piston StyleDish
Piston Net Volume-11.2
Compression Height1.090
Pin Diameter.927
Pin Type.150 Wall x 2.500 Long
Pin Material5115 Steel
Ring TypeNitride Steel Top _ Napier Second
Ring Width1.5 - 1.5 - 3.0
Gas PortsNo
Gas Port TypeN/A
Crankshaft VendorScat Enterprises
Crankshaft MaterialCast Steel
Crankshaft Stroke3.400
Center CounterweightNo
Reluctor WheelNo
Main Journal2.248
Rod Journal2.123
Rear Main Seal1 or 2 Piece
Engine BearingsKing SI Series
BalanceExternal (28 oz)
Rough Bob WeightN/A
Rod VendorScat Enterprises
Rod TypePro Series I-Beam
Rod Length5.400
Pin EndFloating
Rod Material4340 Forged Steel
Rod BoltARP 8740 Cap Screw

Compression Ratio:

Cylinder Head Volume
Part Number Net cc 58cc 61cc 64cc 72cc
9000-12003-000 -11.2 9.78 9.46 9.17 8.47
9000-12003-030 -11.2 9.91 9.59 9.29 8.58
9000-12003-040 -11.2 9.95 9.63 9.33 8.62
Computed with .010 deck and .040 x 4.060 gasket

Browse for more products in the same category as this item:

Stroker Kits by VPE > Ford - 302 Windsor > 347 Cubic Inches - 3.400 Stroke > Dish Top
Stroker Kits by VPE > Ford - 302 Windsor > 347 Cubic Inches - 3.400 Stroke > Dish Top > 20 Standard Wedge